This is a push-push micro sd card connector with a height of 1.85mm, the switch is normally open, and there is no positioning post.
It can replace MOLEX 473521001.
NOTES:
1. MATERIAL:
Housing:High Temperature Thermoplastic
UL94V-0; Color Black.
Contacts: Phosphor Bronze.
Tin 80u" at Solder Tail,
Selectived Gold Flash on Contact Area plating.
Shell: Stainless.
Gold Flash on Contact solder Area
Over Nickel Plating.
2.Electrical Characteristics:
Operating voltage :100v AC(rms)/DC.
Current rating :0.5 A.
Operating Temperature:-25℃~+85℃.
Insulation resistance:1000M ohms min. at 500VDC
Dielectric withstanding voltage :500 VAC/1minute.
Contact resistance:100m ohms max.
3.Mechanical characteristics
Insertion force: 2.0kg Max.
Extraction force: 0.5kg Min.
Mating durability: 10000 cycles at the speed rate of
400-600 cycles/h; Without distortion of plastic and
serious wear and tear in terminal, No signal break.
