micro sd card connector Z0Y0Z446Y

This is a push-push micro sd card connector with a height of 1.85mm, the switch is normally closed, and there is no positioning post.

It can replace molex's 502570-001.

NOTES:
1. MATERIAL:
1.1 Housing:High Temperature Thermoplastic
UL94V-0; Color Black.
1.2 Terminal:Copper Alloy.
1.3 Shell:Stainless Steel.
2.PLATING:
2.1 Contact: Contact Area:Au G/F, Solder area:Matte tin
80u"Min ;Under plate Ni 40u"Min all over
2.2 SHELL: Solder Area:Au G/F,Under plate Ni 50u"Min all over
2.3 CD PIN: Contact Area:Au G/F,Under plate Ni 50u"Min all over
3. SPECIALITY:
3.1 Rated current:1.0A
3.2 Rated voltage:30V
3.3 Contact Resistance:50mΩ MAX
3.4 Insulation Resistance:1000MΩ MIN 500V DC
3.5 Dielectric withstanding voltage: 500V AC.
3.6 Solder ability:255±5℃，5±0.5s.
3.7 Durability:10000 Cycles Min.
3.8 Operating condition:Temperature-40℃～+85℃；
Humidity 80% R.H MAX